• <code id="qgwuw"></code>
    <abbr id="qgwuw"></abbr>
  • <li id="qgwuw"></li>
  • <button id="qgwuw"></button>
    <li id="qgwuw"></li>
    <li id="qgwuw"><tbody id="qgwuw"></tbody></li>
    <rt id="qgwuw"><delect id="qgwuw"></delect></rt>
    產品詳情

    網絡接口協議激光測距傳感器

    • 產品名稱:網絡接口協議激光測距傳感器
    • 產品型號:LDM42E
    • 產品廠商:耶拿
    • 產品文檔:
    你添加了1件商品 查看購物車
    簡單介紹
    網絡接口協議激光測距傳感器 LDM42E

    網絡接口協議激光測距傳感器

    的詳細介紹

    網絡接口協議激光測距傳感器 LDM42E


    網絡接口協議激光測距傳感器 LDM42E

    網絡接口協議激光測距傳感器 LDM42E

    The LDM42E is an optoelectronic distance measuring device for industrial applications with an integrated Ethernet interface.
    It works contact-free on the principle of comparative phase measurement (amplitude modulation) and facilitates precisely accurate measurement of distances.

    Both, t the LDM42E distinguish themselves through high precision as well as high independence from the surface of the measuring object. The red, well visible laser beam allows for easy alignment. The LDM42E has been developed for fast distance measurements on white surfaces. Through the integrated Ethernet interface it is possible to retrieve the measured data in the network via Telnet protocol or to change parameters.


    Applications 
    • Distance measurement and determination of position 
    • Diameter measurement of rolls / coils 
    • Fill level measurement 
    • Position control 
    • Monitoring of safety-relevant parts 
    • Monitoring of lifting plants / lifting height measurement and positioning of elevators
    • Monitoring and positioning of cranes and conveyor systems
    • Millimeter precise measurement on various surfaces 
    • High range reflector-less distance measurement, with additional reflectors on the target object measurements over 100 m 
    • Operation in extreme ambient temperatures with high precision and range
    • High supply voltage range between 10 V and 30 V DC with low power consumption 
    • Safe operation through laser class 2 
    • Easy targeting through visible laser beam 
    • Interface cable for supply voltage, switching output and trigger input 
    • Ethernet interface, protocols, Telnet, UDP 
    • Customized parameterization and display of measured values via PC 
    • Display of measured values in meters, feet, inches or freely scalable 
    • Robust, compact housing, easy to install, protection standard IP 65

    Measuring range1

    0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces 

    Measuring uncertainty2 ±2 mm under defined measuring conditions3
    ±3 mm (+15 °C ... +30 °C)
    ±5 mm (-10 °C ... +50 °C)
    Resolution 0,1 mm, freely scalable
    Reproducibility4 0,5 mm
    Measuring time

    0.24 s ... 6 s adjustable or automatically in mode DT
    0.1 s in mode DW on white surface
    20 ms in mode DX on white surface (only LDM42E) 

    Laser class

    Laser class 2 acc. to DIN EN 60825-1:2001-11 (650 nm, red) 

    Laser divergence5 0,6 mrad
    Operating temperature -10 °C ... +50 °C
    Storage temperature -40 °C ... +70 °C
    Supply voltage

    10 V ... 30 V direct currents

    Power consumption Ca. 3,5 W
    Serial interface6 RS232 or optional RS422, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature of the device and error code
    Switching output

    Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A

    Housing material

    Aluminum anodized

    Size (LxBxH) 187 mm x 96 mm x 50 mm
    Weight 850 g
    Protection class IP 65
    Shock resistance 10 g / 6 ms (DIN ISO 9022-3-31-01-1)
    MTBF

    30,000 hours at 25 °C

    Mounting

    4 drill holes for M6 screws, 100 mm x 85 mm


    Remarks on the technical data: 
    1 Dependent on target reflectance, influence of extraneous light and atmospheric conditions
    2 Statistical spread of 95 %
    3 Measurement on planar, vertical white surface at standstill or in continuous movement, + 15 °C to +30 °C
    4 Dependent on target reflectance, influence of extraneous light and atmospheric conditions
    5 At a distance of 10 m the beam diameter is 6 mm, at 100 m it is 6 cm
    6 Please specify option RS422 when placing the order

    標題:
    內容:
    聯系人:
    聯系電話:
    Email:
    公司名稱:
    聯系地址:
     
     
    注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
    2.如有必要,請您留下您的詳細聯系方式!

    鄂公網安備 42010502000348號

    主站蜘蛛池模板: 萨迦县| 南乐县| 伊宁县| 平陆县| 泸溪县| 郸城县| 砚山县| 美姑县| 洪洞县| 武山县| 绥芬河市| 上饶县| 榆中县| 安康市| 临沭县| 临夏县| 阿瓦提县| 永清县| 怀仁县| 清苑县| 滁州市| 东源县| 开江县| 沂源县| 县级市| 德庆县| 闵行区| 金乡县| 车致| 宝丰县| 丘北县| 阿鲁科尔沁旗| 泊头市| 灌云县| 呼玛县| 华池县| 太白县| 漳州市| 托克托县| 景宁| 陕西省|